In this post, we are uploading flying code to ESPcopter. In order to upload fling code it is necessary to follow 5 simple steps:
1-) Download a flasher app
2-) Download a Lastest flying code
3-) Download a USB Driver
You may need to install Espcopter driver for your computer to recognize to your espcopter.
2-) Open the Flaher app
After unzipping your files which are code and flasher open the following app: nodemcu-flasher-master\Win64\Release klosürü içinde ESP8266Flasher.exe.
3-) Connect your ESPcopter to computer
You will see your drone as a comX port.
4-) Write your code address
Write your code address link to the first row in Confing.
4-) Upload the code
To upload the code click the flash bottom.
Program success.
Lets Fly ESPcopter
1-) Connect your device to ESPcopter
WIFI_SSID “ESPcopter”
WIFI_PASSWORD “12345678”
2-) Open the web browser
Search 192.168.4.1 in your web browser. You will see control interface.
First Button : ARM – DISARM
Second Button: AUTO YAW CONTROL
Third Button: AUTO ALTİTUDE CONTROL
Forth Button: AUTO MISSION CONTROL
Have a nice flight